Standard Model
Maser Ultrasonic Pest Repellers are electronic transmitters of high frequency sound (well above the 20 KHz frequency which is the upper limit of the hearing range of the human ear) they emit intensive sound at high decibel levels (sound pressure) that is audible and painful to pests but is inaudible and harmless to humans. The pests will usually leave the area being protected by the ultrasound. They do not get killed.
The powerful sound waves generated by the transducers of Maser repellers are within the hearing range of many pests and cause them pain and discomfort. Sometimes they will leave the area being protected immediately, in other cases it will take as long as two to three weeks before significant reduction in infestation occurs.
Maser's transducers are completely quiet. If you cannot hear them do not think that the unit is not working. You cannot hear ultrasound
Model: Standard
This model is a stand alone system that can protect an enclosed area of 300 sq. ft.
Area of Effectiveness:
- A single Maser unit will protect an area of 300 sq. ft. in the work place or cabin. In the areas of the false ceiling/flooring the additional transducer will protect an area of 150 sq. ft. Under difficult conditions, the size of the area that will be protected can be considerably less. The type of structure, contents and partitions may limit the area of effectiveness.
- Important considerations are the cleanliness of the area, the means of entry for rodents(easy or difficult), protection of food present in the area, and the availability of alternate source of food and water. Try one Maser in the area you wish to protect. Within two or three weeks, or sooner, you should see a reduction in pest activity (sightings of rodents and droppings, and damage).If not, you may need one or more additional units
Specifications
| Power Supply |
230 Volts AC 50 HZ |
| Operating Frequency |
Above 20 Khz |
| Sound Output |
80 to 110 dB |
| Power Output |
900 mW per transducer |
| Power Consumption |
5 Watts per transducer |
| Dimensions |
225 x 65 x 115(mm) |
| Weight |
1250 gm |
T M I / T M II Model Rodent Control
Maser Ultrasonic Pest Repellers are electronic transmitters of high frequency sound (well above the 20 KHz frequency which is the upper limit of the hearing range of the human ear).They emit intensive sound at high decibel levels (sound pressure) that is audible and painful to pests but is inaudible and harmless to humans. The pests will usually leave the area being protected by the ultrasound. They do not get killed.
The powerful sound waves generated by the transducers of Maser repellers are within the hearing range of many pests and cause them pain and discomfort. Sometimes they will leave the area being protected immediately, in other cases it will take as long as two to three weeks before significant reduction in infestation occurs.
Maser's transducers are completely quiet. If you cannot hear them do not think that the unit is not working. You cannot hear ultrasound.
Model: Standard
This model is a stand alone system that can protect an enclosed area of 300 sq. ft.
Model: Tailor made I:
This model is a stand alone system with an additional transducer. Apart from protecting the main workstation the additional transducer protects the area of false ceiling or flooring in the ATM/Server room / Data, center/Hub room etc.
Model: Tailor made II:
This model is a stand alone system with two additional transducers. Apart from protecting the main workstation the additional transducers protects the area of false ceiling or flooring in the ATM/Server room/Data center / Hub room etc
Area of Effectiveness:
A single Maser unit will protect an area of 300 sq. ft. in the work place or cabin. In the areas of the false ceiling/flooring the additional transducer will protect an area of 150 sq. ft. Under difficult conditions, the size of the area that will be protected can be considerably less. The type of structure, contents and partitions may limit the area of effectiveness
Important considerations are the cleanliness of the area, the means of entry for rodents(easy or difficult), protection of food present in the area, and the availability of alternate source of food and water. Try one Maser in the area you wish to protect. Within two or three weeks, or sooner, you should see a reduction in pest activity (sightings of rodents and droppings, and damage).If not, you may need one or more additional units.
Specifications
| Power Supply |
230 Volts AC 50 HZ |
| Operating Frequency |
Above 20 Khz |
| Sound Output |
80 to 110 dB |
| Power Output |
900 mW per transducer |
| Power Consumption |
5 Watts per transducer |
| Dimensions |
225 x 65 x 115(mm) |
| Weight |
1250 gm. |
VHFO Model Rodent Repellents
Introduction:
- Maser Ultrasonic Rodent Repeller – VHFO Model are electronic transmitters of high frequency sound waves (well above the 20 KHz frequency which is the upper limit of human ear.) they emit intensive sound at high decibel levels (sound pressure) that is audible and painful to Rodents, but is inaudible and harmless to humans. The Rodents usually leaves the area being protected by ultrasound. They do not get killed.
The System:
- Maser Ultrasonic Rodent Repeller – VHFO Model is a system of one Master console and accessories that include twelve Transducers, 300 yards of cables & a pair of stand bracket. The Master console is installed in the main control room / server room and the Transducers in the problematic area i.e. above and below false ceiling and below false flooring.
How Does The Maser Vhfo Work:
- The powerful sound waves generated by the Transducers of VHFO Model are within the hearing range of many Rodents and cause them pain and discomfort. Sometimes, the Rodents will leave the area being protected immediately and at other times it will take as long as four to six weeks before there is a significant reduction in infestation.
The Transducers are quiet. If you cannot hear them, do not think that the unit is not working. You cannot hear ultrasound
Features:
Master Console:
- The Master console needs a power connection of 5A electrical plug and comes equipped with a 3-pin power supply cord of 2.5 meters
Transducers:
- Each Transducer covers an open area of 300 sq.ft. when the average height of the ceiling is 10 ft. But if installed in the false ceiling of false floorings, it will cover and approximate area of 150 sq. ft. The whole system (12 nos.) will accordingly cover an open area of 3600 sq. ft. And if installed in false ceiling and false floorings, the area covered will be considerably less
- Each Transducer occupies a maximum space of 3 cubic inches and is aesthetically designed to match your decor
- Being mono polar in nature they can be installed in any sensitive area as there is zero risk of sparking
- The Transducers can withstand high temperatures in the false ceiling and low temperatures in cold storages and air locks
- The Transducers do not need a power connection
- The Transducers can be tested on an audible range with the help of a self-testing facility
Specifications
| Configuration |
One master console with 12 transducers |
| Operating frequency |
Above 20 KHz (variable) |
| Sound Output |
80 dB to 110 dB (at 1 meter) |
| Power Output |
850 mW per transducer |
| Power Consumption |
20 W approximately |
| Power Supply |
230V AC 50 Hz |
| Dimensions |
16" X 8" X 4" |
| Weight |
5.5 kgs approximately |
| Mounting |
Wall / table mounting |
VHFO LP 20 Model Rodent Repellents
Introduction:
- VHFO LP 20 model is a system of one master console and accessories that include twenty transducers.
- Looping is permitted in the system. Maser Ultrasonic Rodent Repeller – VHFO LP 20 Model are electronic transmitters of high frequency sound waves (well above the 20 KHz frequency which is the upper limit of human ear.) they emit intensive sound at high decibel levels (sound pressure) that is audible and painful to Rodents, but is inaudible and harmless to humans. The Rodents usually leaves the area being protected by ultrasound. They do not get killed
The System
- Maser Ultrasonic Rodent Rebeller – VHFO LP 20 Model is a system of one Master console and accessories that include twenty Transducers, 300 yards of cables & a pair of stand bracket. The Master console is installed in the main control room / server room and the Transducers in the problematic area i.e. above and below false ceiling and below false flooring
How Does The Maser Vhfo 20 Work:
- The powerful sound waves generated by the Transducers of VHFO LP 20 Model are within the hearing range of many Rodents and cause them pain and discomfort. Sometimes, the Rodents will leave the area being protected immediately and at other times it will take as long as four to six weeks before there is a significant reduction in infestation
- The Transducers are quiet. If you cannot hear them, do not think that the unit is not working. You cannot hear ultrasound
Features:
Master Console:
- The Master console needs a power connection of 5 A electrical plug and comes equipped with a 3-pin power supply cord of 2.5 meters. It can be interfaced with all Maser Transducer
Transducers:
- Each Transducer covers an open area of 300 sq.ft. when the average height of the ceiling is 10 ft. But if installed in the false ceiling of false floorings, it will cover and approximate area of 150 sq. ft. The whole system (20 nos.) will accordingly cover an open area of 6000 sq. ft. And if installed in false ceiling and false floorings, the area covered will be considerably less
- Each Transducer occupies a maximum space of 5 cubic inches and is aesthetically designed to match your decor
- Being mono polar in nature they can be installed in any sensitive area as there is zero risk of sparking
- The Transducers can withstand high temperatures in the false ceiling and low temperatures in cold storages and air locks. o The Transducers do not need a power connection
- The Transducers can be tested on an audible range with the help of a self-testing facility
Specifications
| Configuration |
One master console with 20 transducers. Looping Permitted |
| Operating frequency |
Above 20 KHz (variable) |
| Sound Output |
80dB to 110dB (at 1 meter) |
| Power Output |
850 mW per transducer |
| Power Consumption |
20 W approximately |
| Power Supply |
230V AC 50 Hz |
| Dimensions |
16" X 8" X 4" |
| Weight |
5.5 kgs approximately |
VHFO Transducers
Introduction:
| Above False Ceilling |
150 Sq. Feet |
| Below False Celling |
300 Sq. Feet |
| Below False Flooring |
150 Sq. Feet |
Specifications
| Sound Output |
80 db to 110 db |
| Operating Frequency |
Above 20 Khz |
| Power Output |
800 mW |
| Volume |
3 Cubic Inches |
Ultrasound Detector
Product Details:
- The Ultrasound emitted by our transducers connected to our equipment is above the hearing ability of humans and hence inaudible to us
- All our transducers can be tested with the help of a test switch or transducer testing mode on the controller to which they are interfaced. The transducers when in testing mode will cross over to an audible range emitting a beep beep sound
- However, for the purpose of testing our transducers when they are actually emitting ultrasound we have developed the Spectrum Analyzer and Ultrasound Detector which can detect ultrasound being emitted from our transducers thereby confirming their correct working
Ultrasound Detector:
- The Ultrasound Detector is utilized for commissioning of the equipment. The Ultrasound Detector detects the presence of ultrasound emitted by the transducers and indicates the same by the deflection of the needle on its front panel
The same is illustrated graphically above:
- The Ultrasound Detector can work with our Analog as well as Digital Product suite
Miste Transducers
Specially Designed for Customized Solutions.
